Подгревател PHSEK

Indispensable for avoiding thermal shock on multilayer PCBs while reworking. Its composition, Preheater and PCB support, is a complete solution to rework small / medium PCBAs, such as the ones commonly used in electronic industries. It features a heating area of 130 x 135 mm / 5.12 x 5.31 in and four TC connections. Matchless reliability in temperature accuracy and control of the PCBA so that no component is damaged.

It features three work modes:

1. Power Mode allows working at a fixed power level with the option of using protection thermocouple.
2. Temperature Mode keeps the PCBA at a selected temperature, using the regulation thermocouple and, optionally, protection thermocouples.
3. Profile Mode allows control of the heating rate of the PCBA by the use of a control and protection thermocouple, without exceeding the recommended limit levels in each application. It features 22 customizable profiles.

Up to four thermocouples can be connected in any of the three work modes.

Technical data:

• Peak power: 800 W
• Selectable temperature: 50 to 250 ºC / 120 to 482 ºF
• Heating area:
  • 65 x 135 mm / 2.6 x 5.3 in - 1 zone
  • 130 x 135 mm / 5.1 x 5.3 in - 2 zones
• Type K TC connector: 4 for Control & Protection
• Profiles: 20 (up to 6 steps for each)
• Set temperature profiles: 3 profiles (2, 3 or 4 steps)
• Maximum work time: 50 min or indefinite
• ESD safe: Meet ANSI/ESD S20.20-2021
• Robot connector: Remote control
• Aux. Connector: Console connection
• Pedal connector: Connect a pedal (ref. P-005) to control the heater